The TV digital set-top box sharing device we talked about is actually similar to a typical TV set-top box, but there is a certain difference. This kind of sharing device can allow different rooms to watch the same channel of digital TV without using a set-top box at the same time. If you want to see different channels, you can decrypt it and you can read it.
1. Connect the limited TV subscriber line to a dedicated distributor.
2. Replace the ordinary cable TV subscriber box with a dedicated subscriber box.
3, according to the instructions written on the AV cable, cable TV and other devices and make the correct link.
4, a good link can boot detection, under normal circumstances can be implemented remote control operation.
1. Place the top of the set-top box before launch and correspond to the position accepted by the remote control so that the panel is aligned to the same place.
2, using the IR extension cable included with the product, this method is suitable for the case where the set-top box and the host are not together, use a 3.5mm line inserted behind the transmitter, the other head of the purple transmitter is glued to the set-top box remote controller to accept The location also enables remote set top boxes at the receiving end.
3. Place the transmitter and set-top box face to face. It also enables remote control of set-top boxes.
1. Applicable to companies with more TV sets such as hotels, hospitals, saunas, large restaurants, rental houses, and factory dormitories.
2. One device can modulate 4 set-top boxes into 4 channels, and 40 sets-top boxes + 10 sets of T8004 output 40 channels to each room on the floor.
3, the equipment is simple to install, do not re-wiring and change the original line, set-top boxes concentrated in the engine room, convenient hotel management, not easily stolen.
4. Applicable to hotels that need to increase satellite channels, allowing all rooms to watch satellite programs such as: Phoenix TV, European football, etc.
5, can be self-hosted channels, such as hotel hospitals to play their own ads, school-run teaching channels, song and dance halls, restaurants wedding live broadcast.
1, the price is more affordable.
2. The installation does not require rewiring and will not destroy the existing decoration style.
Mulitiway Boxed Power Supply with PFC function .
4channels /9 channels / 18 channels metal boxed power supply with 12V and 24V output . can put 7AH battery inside .
CCTV power supply Unit(-High quality project series)DC12V 5A,4 Channel, PTC protection for each channel
Can customized output and LOGO .
1. Universal AC input/Full range: 96-264V AC,47-63Hz;
2. Output voltage:DC12V;
3. Output current:5A/10A/16A/20A/30A;
4. Output Channels:4CH/9CH/18CH;
5. Voltage and current of each channel distributing evenly;
6. Output Voltage adjustable: DC 11-15V.
1. Built-in PFC(Power factor correction)circuits
2. Individual PTC fuse for each output channel.
3. Built-in EMI filter,100% full load burn-in test.
4. Short circuits protection
5. Over current protection
6. Over voltage protection
7. Low output ripple and noise
Certification and Warranty
1.. CE& FCC & EMC & LVD & ROHS
2. Warranty:3 years
1. Stepping motor
2. PLC control System
3. Surveilance cameras
4. LED advertisement
5. Lamps and lanterns
6. CP communication
7. Communication equipment
8. Industrial control
9. Home Application
10. The traffic and Building
4 channels metal boxed power supply ; Metal box cctv power supply ; 12v power supply
Guangdong Steady Technology Co.LTD , https://www.steadysmps.com