How to restore the factory settings of bios _bios restore factory settings have an impact on the operating system?

**BIOS Overview**

BIOS stands for Basic Input/Output System. It is a firmware program that is permanently stored on the motherboard's ROM chip. When a computer starts, it first loads the BIOS settings. If these settings are changed or configured incorrectly, the system may fail to boot. To resolve this issue, you can restore the BIOS to its default settings. After leaving the factory, the computer comes with initial BIOS configurations. The following steps will guide you through restoring the BIOS to its factory settings.

**Precautions:**

1. Restoring the BIOS to default settings should be done carefully. If not done properly, it might prevent your computer from booting. Only do this if there’s an issue or if you don’t need to reinstall the operating system.

2. To avoid confusion later, it’s recommended to take a photo or video of your current BIOS settings before resetting. If something goes wrong after restoring, you can refer back to the original configuration to adjust it accordingly.

**How to Restore Default Settings / Reset Motherboard BIOS to Factory Settings – Tutorial** **Method One:**

1. During startup, press keys such as Delete, F1, F2, F8, F9, F10, ESC, or Enter to enter the BIOS interface. The exact key may vary depending on the manufacturer.

How to restore the factory settings of bios _bios restore factory settings have an impact on the operating system?

2. Once in the BIOS, look for options like "Load Optimized Defaults" or "Load Setup Defaults." Press Enter, then select "Yes" or "OK." Some BIOS versions have shortcut keys at the bottom, such as F6 for "Load Optimized Defaults." Save the changes by pressing F10 or F4 and restart the system.

How to restore the factory settings of bios _bios restore factory settings have an impact on the operating system?

3. For UEFI-based systems, there are typically two types of default settings: UEFI and Legacy. For example, on Lenovo laptops, go to the "ExTI" section and choose "OS Optimized Defaults" if using Windows 8 or later. For older systems, set it to "Other OS" or "Disabled" for Legacy mode.

How to restore the factory settings of bios _bios restore factory settings have an impact on the operating system?

4. Navigate to "Load Default Settings" or press key 9 to confirm and load the default BIOS settings in Legacy mode.

How to restore the factory settings of bios _bios restore factory settings have an impact on the operating system?

5. Finally, press F10 or F4 (check the lower right corner for guidance), select "Yes," and restart the system.

How to restore the factory settings of bios _bios restore factory settings have an impact on the operating system?

**Method Two:**

1. For desktop computers, you can open the case, remove the CMOS battery (also known as the button battery) from the motherboard, wait for 15 seconds, and then reinsert it. This will reset the BIOS settings to their defaults.

How to restore the factory settings of bios _bios restore factory settings have an impact on the operating system?

2. Some motherboards also have a jumper that allows you to reset the BIOS. Locate the 2-3 pin jumper and short it using a small screwdriver or jumper cap.

How to restore the factory settings of bios _bios restore factory settings have an impact on the operating system?

These are the two main methods to restore the BIOS settings of your computer. If you need to reset the BIOS to its default configuration, follow these steps carefully.

**Does BIOS Affect the Operating System After Restoring Factory Settings?**

The default BIOS settings are designed to meet the basic requirements of the computer, so restoring them usually won't affect normal operation. However, there are a few things to keep in mind:

How to restore the factory settings of bios _bios restore factory settings have an impact on the operating system?

If your CPU was overclocked, it will return to its default frequency after resetting the BIOS, but this won’t harm the system.

If your system runs Windows XP without AHCI drivers, the default hard disk mode may be set to AHCI, which could cause a blue screen. In this case, manually change the hard drive mode to IDE.

Other special settings, such as dual hard drive configurations, may also need to be adjusted after a BIOS reset.

Somke Machine

Fog Smoke Machine

Feature:
* DURABLE MATERIAL: It is made of top grade aluminum alloy, built-in fan for heat dissipation, stable and lightweight. Look upscale and durable for long time.
* BEAUTIFUL COLOR SHOW: It can choose single colors or color combinations. It will be great enjoyment to see the colorful light projected to the ceiling, wall and floor,etc.
* SUIT FOR VARIOUS OCCASION: Suit for various parties, birthday, dance, holiday, celebrations, Karaoke, family or friend home celebration. The laser light can be used in home, disco, living room, bar, club, or anywhere needed.
* EASY OPERATION: The light will enter sound activated mode, which makes the lights blink according to the beat of the music or sound. Adjustable motion speed.
* CREAT ATMOSPHERE EVERYWHERE: This laser light is mini size with tripod, portable and convenient for carry. You can place it everywhere.


Our company have 13 years experience of LED Display and Stage Lights , our company mainly produce Indoor Rental LED Display, Outdoor Rental LED Display, Transparent LED Display,Indoor Fixed Indoor LED Display, Outdoor Fixed LED Display, Poster LED Display , Dance Led Display... In additional, we also produce stage lights, such as beam lights Series, moving head lights Series, LED Par Light Series and son on..

Somke Machine Series,Smoke Machine,Wedding Smoke Machine,Smoke Machine Party

Guangzhou Chengwen Photoelectric Technology co.,ltd , https://www.cwleddisplay.com