Externally-attached rubber waterstop with special externally-attached waterstop
The externally-attached rubber waterstop product is also called the back-attached waterstop by the majority of users. This product can be widely used in a variety of concrete engineering deformation joints and has been welcomed by many users. The product is widely used in various concrete projects and its two characteristics are inseparable.
First of all, the externally attached rubber waterstop (18703187870) product is used in concrete engineering. The expansion and contraction deformation of the waterstop and the deformation of the leakage joint will not exceed 5 mm. This error is very small. The water stopping effect of the product is better. Secondly, the product can be customized to meet the needs of users during production and processing. The externally attached rubber water stop has various shapes and types and is suitable for use in different concrete projects. This feature also makes it widely used in various concrete projects.
Installation of rubber waterstop with externally attached deformation joint
1. When installing, fix the upper and lower ends of the water stop product, you can use steel bar welding to fix it, but during the welding process, do not damage the surface of the water stop product. Affect.
2. When installing the externally attached rubber waterstop products in the water, you should pay attention to install the waterstop products horizontally, so that the installation will have a better waterstop effect.
Pay attention to these five points in the storage of deformed seam rubber waterstops:
1. The base should be kept dry and clean when pasting the waterstop to make it stick tightly.
2. Waterstop is applied inside the concrete, so it should be considered to be able to be wrapped by concrete more than 50 mm when positioning.
3. The water stop strip along the extension direction of the construction joint should form a closed loop without leaving a break point and cannot be blocked by scum and dust. The overlap between the externally attached rubber water stop bands can be completed with its own viscosity.
4. When pouring concrete to vibrate, avoid vibrating and touching the water stop. Before building the next concrete, avoid soaking in rainwater or other intrusive water.
5. The specification of externally attached rubber waterstop is a strip-shaped solid with a rectangular cross-section of 20 mm × 30 mm, which is reeled into a roll every 5 meters for a total of 25 meters. Special specifications can be customized with drawings and samples.
6. This product is a non-dangerous product, and waterproof and moisture-proof measures should be taken during transportation and storage. The shelf life is 24 months.
The main pain points in obtaining customers in foreign trade are fierce market competition, high customer acquisition costs, low customer stickiness, and single marketing methods. With the changes in the market environment, traditional marketing methods have been unable to meet customer needs. Enterprises need innovative marketing methods and technical means to improve customer stickiness and loyalty, reduce customer acquisition costs, in order to obtain more business opportunities in the fierce market competition.
Car Seat
Guangdong ganzhou , https://www.tlqcjs.com