Junpei Optoelectronics develops LED plant growth lights

Junpei optoelectronics focuses on the development and actual planting of LED plant growth lamps. The company has developed a high-power LED light version for the current LED plant growth lamps that are sold at prices that exceed the average large or organic food.

The person in charge of Junpei Optoelectronics said that the current organic planting is recommended to be planted with a 48w light source. The lamp was originally developed to provide a direct light source for the plant to be planted to stimulate growth, but currently commercially available LED plants. The price of growing lamps far exceeds the acceptance of ordinary big or even organic food lovers.

To this end, Junpei Optoelectronics has developed a high-power LED light version that has been developed in LED plant growth lamps with LED heat-dissipating lamp housings, LED heat-receiving and other LED-specific heat-dissipation patents. Special wavelength illumination of red, blue and purple for plant growth. By planting the plant with an appropriate proportion of red, blue and violet light, it will directly promote plant growth without the need to waste more on the electricity costs of the plant. It can be used not only for organic planting and other related needs, but also for assembling LED lights in clip-on lamps. It is suitable for small-area planting or office desktop plant potting at home, or 5w or 12w according to plant light intensity requirements. Clip light. Significantly reduce the actual expenditure of plant growers.

The Solder Cups D-sub connector, also known as Solder Cups  D-sub connector , typically contains a pin layout of 9 pin , 15 pin , 25 pin , 37 pin & 50 pin positions housed in increasing shell sizes accordingly. They are available in both male (plug) and female (socket) variants with the male signal contacts/pins (current rating of 5A) spaced every 2.76mm in horizontal rows and the spacing of rows vertically at 2.84mm laid out half the distance between pins of existing rows.


IP66 IP67 Rated Waterproof D-Sub Panel Mount Solder Connectors
Harsh outdoor or indoor environments can destroy electronic equipment. Standard D-sub connectors are not intended to withstand contaminants such as water and dust. These waterproof solder cup connectors are available in male or female genders and DB9, DB15, DB25, and HD15 sizes. They will accommodate wire ranges from 30 - 20 AWG. Construction features gold plated brass contacts, nickel plated steel shells, and a silicone insulating ring. Maximum recommended panel thickness is 0.078".

Antenk offer a wide range of waterproof Standard Density and high density male and female high density D-Sub connectors solder cup  with stamped and formed Contacts in cable mount used in a variety of demanding applications.


Antenk's Solder Cup D-Sub Connectors Stamped contacts

FEATURES

Solder cup d-subs available in industry sizes/positions

Low cost economy series.

Nickel shells have indents to provide grounding and additional retention.

Low cost & high performance, non-removable stamped contacts.

Optional mounting hardware available.


Antenk's SOLDER CUP D-SUB CONNECTORS Stamped contacts

MATERIALS

Shell: Steel, Tin or Nickel Plated

Insulator: Glass-filled thermoplastic. U.L. rated 94V-O

(230°C process temp)

Stamped contacts: Male pins - Brass | Female pins - Phosphor bronze

Plating: Gold flash on entire contact (contact us for other plating options)



solder cup Waterproof D-Sub Connector

Solder Cup Waterproof D-Sub Connector stamped & formed contact, Solder Cup Waterproof D-Sub Connector machined contacts, Waterproof Panel Mount Solder Cup D-Sub Connector

ShenZhen Antenk Electronics Co,Ltd , http://www.antenk.com