Seeing the subject probably thinks that there are so many smart cameras now. What good is this small party in the end? What is particularly attractive to buy? Actually not.
However, it is cheap and the crowdfunding version can buy a 1080P smart camera for only 99 yuan.
The price of the official version was changed to 129 yuan. In addition to the simple price increase of the relatively crowdfunded version, there was one more power adapter than the crowdfunded version. It's also a plus.
Compare the same type of product:Compared to other smart cameras of Xiaomi's own home, this is the most cost-effective and is suitable for monitoring.
Compared with the early-generation millet smart camera, it has a night vision function, and it costs less than 50 yuan more than the night vision smart camera. And the movable performance of the stent far exceeds these two parts.
Compared to the 399 Mi's smart camera, there is less remote control rotation, but still can manually adjust the rotation of a large range, the price is only only a quarter of it. Buy the 399 money directly to buy 4 small squares together to see 360 ​​degrees, but also 啥 electric adjustment?
Therefore, the most affordable and most cost-effective one among the smart camera products that can access Xiaomi's “home†app is the small camera.
Compared with other brands such as the 360 ​​smart camera, the price of 99 yuan can only buy a non-night vision 720P camera. It is even less comparable.
â–² Crowdfunding order number. Crowdfunding this one has a twist, after the first time to find the camera lack of serious color, behind the application for a replacement, this time let me know that Xiao Fang is actually the company below Jiu'an.
â–² After the public sale was started, it was ordered on the official website, but only the official website shipped. In the evening, Vientiane City was spotted. After the phone was confirmed, three scooters were bought back.
â–² crowdfunding version of the packaging
â–²Crowdfunding version of color packaging
â–² Crowdfunding Edition comes with various styles of stickers to decorate the camera
â–²Crowdfunding Edition Family Portrait
â–² The initial pairing must be reset using the ejector pin hole to trigger the pairing mode.
â–² body
â–² body back.
â–² USB port is used for daisy-chain cameras.
â–² open bracket only TF card slot and reset hole.
â–² The support designed by Xiao Fang is special. The 3-axis rotation can create a variety of shapes that can be adjusted without the need for external brackets.
â–² Support MicroSD memory card. The writing speed requirement is not high, ordinary C10 is enough.
â–² The bottom nameplate can see the MAC address, which is convenient for identification and management at the router end.
â–² The official version of the packaging is completely different from the crowdfunding version.
â–² The shape of the Quartet matches the name of Xiao Fang more closely. The brand new white packaging and crowdfunding version are quite different and have a higher degree of recognition.
â–² One of the obvious differences between the content and the crowdfunding version is that there is an additional power adapter, so that you can use it right away.
â–² Apple packaging mode.
â–² Is there a difference between the crowdfunding version and the official version?
â–² The official version of the bracket has not been changed and is as easy to use as the crowdfunding version.
â–² looks the same positive
â–² The official version has a modification to the lens group. The most intuitive part is that the outermost layer of protective glass is flattened. No longer prominent.
â–² The official version adds the QR code at the bottom of the nameplate.
â–² No change on the back.
â–² There is no change at the bottom.
â–² The attached sticker is still not the same sticker.
â–² The bottom of the package is an attachment.
â–² power adapter, power cord
â–² The power adapter is 5V 1A, but the power is not enough but it is enough. Rejoining one can also provide enough power,
â–²There are manuals and stickers inside the top cover, don't lose it. 
â–² The small square magnetic bracket plus 3-axis rotation can be easily mounted on a ferrous body and rotated to a suitable monitoring angle. 
â–² Both the official version and the crowdfunding version can use a magnet to absorb the top of the camera to make various shapes. However, from the two official versions I received, the official version of the magnetic bracket is slightly weaker than the crowdfunding version. This is due to the reason that the optimization of the magnetic force results in the failure of the IR slice operation.
â–² magnetic combination can save a lot of things. In the absence of wind and vibration can be directly through the magnetic combination to obtain a greater monitoring range.
â–² Plus video signals are all wireless transmissions. The only cable required is the power supply line. The USB behind the small party can power the next camera.
â–² Theoretically speaking, as long as the power supply capacity is sufficient, a small cable voltage loss can be unlimited Julian. I have tested 3 of the hand and can be normal with no problem.
â–² The working temperature of the official version and the crowdfunding version are both as high. At the ambient temperature of 14.4 degrees, the maximum temperature at the back of the small square is about 47 degrees. The front camera also has a working temperature of 41 degrees.
â–² The red light of the crowdfunding version of the infrared fill light has always been where the first users spit. It is more obvious in the dark.
The official version corrects this problem and reduces the visible red light intensity. However, the obvious disadvantage is that the night vision is more than 1.5 meters away. The brightness of night vision has decreased.
At this point, in the end, it is to choose carefully whether the crowdfunding version suffers from the night vision mode of red light or the official version tolerates darkness.
â–² Night vision is a big difference between the crowdfunding and the official version. The other difference is the lens. The official version made some changes in the lens group. These changes are hardware-level and will not be obtained by upgrading the firmware.
â–² The official version (bottom) of the screen looks clean, and the colors are not green in the crowdfunding version. The biggest difference is that the wide angle is bigger. From the above figure, you can intuitively see the difference.
The crowdfunding and official versions are common across both firmware and app, so there is no more difference in use.
▲ Xiao Fang’s comparison has an industrial design atmosphere, neat appearance, simple structure, and relatively internal arrangement.
â–² The bottom bracket is fixed with two screws
â–²Good internal fixation, good space utilization, and extra space for heat dissipation
â–² The back cover is a snap.
â–² USB port, erected and welded on the motherboard. Resistance to insertion, pull out.
â–² The upper part of the small square hole on the back is a speaker for state prompting, voice and conversation. The lower opening is a cooling hole. according to
â–² smart (Wifi) chip or a single circuit soldered on the motherboard.
â–²The crab used by Wifi has good stability.
â–² master chip
â–²The reverse side of the circuit. Arrangements and workmanship are all good.
â–² TF card interface
â–² Reset button.
The difference between the crowdfunding and the official version:
1: The crowdfunding version costs 99 yuan and the official version is 129 yuan.
2: The official version has one more power adapter than the crowdfunding version.
3: The fill light red light in the official version night vision mode is not obvious.
4: The crowdfunding version is better than the official version of night vision.
5: The official version has a larger wide angle and a wider monitoring range.
6: Color correction of crowdfunding.
The low price, small size and fast link speed are the reasons why I first looked at the small party. After installation, it was easy to install, and the speed of the link opening in the app made me decide to replace the existing camera in the home and the unit. The sharpness of 1080P is not comparable to 720P, and this is very significant for monitoring. Monitoring is not just a matter of seeing it, but it can be seen more clearly.
1: The difference between the official version and the crowdfunding version of night vision is something I did not expect. If you know that the difference is so big, I will all choose to buy a crowdfunding version. I use it as a monitor to have a higher requirement for night vision. For home use, it is recommended to buy the official version with a larger wide angle.
2: When the crowdfunding version arrives, it's a bit of a quality problem. The exchange of goods was relatively straightforward, and the number of calls was confirmed several times. The customer service was polite and there was no dissatisfaction (except quality) in the impression.
3: There are 3 official editions and 2 crowdfunding editions currently in service. The first crowdfunding version has been running for more than 2 months. There is no major problem. This is why I decided to monitor and replace the small party. However, there are currently one of the three official versions that have seen a reddish image and restarted. The engineer in the consulting small group said that it was caused by the failure of the IR filter action, and the restart can be done. Said to be amended in the future
4: Android version Mijia APP and iOS version Mijia APP small and medium operations are very different, in general, the Android version is better to use some, iOS often will not connect. Asked friends in other regions no similar problems, it seems related to the region's servers.
5: As a pure monitoring, I do not use the call function. I have seen feedback from the group's friends that listening and speaking cannot be enabled at the same time, like a walkie-talkie. This problem is not big or small. The group said it was updated after the year (nothing to do with me - I don't need it)
6: In my opinion, the biggest factor affecting my purchase is night vision worse than the crowdfunding version. Engineers in the group say that they will optimize the firmware.
Original factory Original factory wholesale Air Glow Plus ,Similar Puff Plus,but good quality.Support OEM.Custom your own logo.
Air Glow Plus
Shenzhen Ousida Technology Co., Ltd , https://www.osdvape.com