- Model NO.: CC-BE48
- Conductor Type: Stranded
- Conductor Material: Copper
- Insulation Material: XLPE
- Range of Application: Control Cable
- Brand: Yifang
- Alternative Application: Control Cable
- Strandard: UL
- Transport Package: Wooden Drum
- Origin: Zhengzhou, China
- Type: Insulated
- Application: Control Cable
- Sheath Material: PVC
- Material Shape: Round Wire
- Certification: ISO9001, CE
- Model Number: Kvv-Be48
- Cores: Multicores
- Trademark: Yifang
- Specification: 2*14AWG TO 37*14AWG
- HS Code: 8544492100
Applications
As flame-retardant multi-conductor control, signal or power cables rated 600 volts, 90 ºC in wet or dry locations. Specifically approved for installation in cable trays per Article 336 of the NEC. Also approved for use in Class I remote-control and signaling circuits per Article 725 of the NEC. Type TC cable is suitable for use in Class I and II, Division 2 hazardous locations. Cables may be installed in air, in ducts or conduits, in tray or trough, and are suitable for direct burial.
Construction
Stranded uncoated copper conductors, 30 mils FR-XLPE flame-retardant crosslinked polyethylene insulation, color coded, two conductors flat, three or more conductors twisted with suitable fillers where necessary to make round, cable tape, PVC jacket overall, surface printed.
Standards
- Listed by UL as Type TC per Standard 1277 for Tray Cables.
- Cables UL listed for Direct Burial.
- Individual conductors pass UL VW-1 flame test.
- Individual conductors UL listed as Type XHHW-2.
- Overall jacket UL listed as Sunlight Resistant.
- Cables with grounding conductor UL listed for Open Wiring.
- Cables pass IEEE-383 ribbon burner flame test and ICEA 210,000 BTU/hour test.
- Cables pass IEEE1202/CSA FT4 (70,000 BTU/hr) cable tray flame test.
- Cables meet requirements of ICEA S-73-532, NEMA WC70 for Control Cables.
- Cables may be supplied with an insulated ground and marked ""Open Wiring.""
- Standard color coding is Method 1 for NEC applications per Appendix E, Table E-2 of ICEA S-73-532(TECH I006). This color coding method omits white and green from the color sequence. A white or green conductor can be supplied on request.
- Color Coding also available ICEA Method 1, Table E-1; power sizes, ICEA Method 4.
- Bare or Tinned Copper
- Flexible stranded conductors
- E1 or E2 color codes
- EPR Insulation
- CPE, CSPE, LSOH jackets
- Overall copper tape shield
- Overall copper braid shield
- Overall longitudinal corrugated copper shield
- Overall mylar tape shield with drain wire
- 1000 volt rated construction
As flame-retardant multi-conductor control, signal or power cables rated 600 volts, 90 ºC in wet or dry locations. Specifically approved for installation in cable trays per Article 336 of the NEC. Also approved for use in Class I remote-control and signaling circuits per Article 725 of the NEC. Type TC cable is suitable for use in Class I and II, Division 2 hazardous locations. Cables may be installed in air, in ducts or conduits, in tray or trough, and are suitable for direct burial.
Construction
Stranded uncoated copper conductors, 30 mils FR-XLPE flame-retardant crosslinked polyethylene insulation, color coded, two conductors flat, three or more conductors twisted with suitable fillers where necessary to make round, cable tape, PVC jacket overall, surface printed.
Standards
- Listed by UL as Type TC per Standard 1277 for Tray Cables.
- Cables UL listed for Direct Burial.
- Individual conductors pass UL VW-1 flame test.
- Individual conductors UL listed as Type XHHW-2.
- Overall jacket UL listed as Sunlight Resistant.
- Cables with grounding conductor UL listed for Open Wiring.
- Cables pass IEEE-383 ribbon burner flame test and ICEA 210,000 BTU/hour test.
- Cables pass IEEE1202/CSA FT4 (70,000 BTU/hr) cable tray flame test.
- Cables meet requirements of ICEA S-73-532, NEMA WC70 for Control Cables.
- Cables may be supplied with an insulated ground and marked ""Open Wiring.""
- Standard color coding is Method 1 for NEC applications per Appendix E, Table E-2 of ICEA S-73-532(TECH I006). This color coding method omits white and green from the color sequence. A white or green conductor can be supplied on request.
- Color Coding also available ICEA Method 1, Table E-1; power sizes, ICEA Method 4.
- Bare or Tinned Copper
- Flexible stranded conductors
- E1 or E2 color codes
- EPR Insulation
- CPE, CSPE, LSOH jackets
- Overall copper tape shield
- Overall copper braid shield
- Overall longitudinal corrugated copper shield
- Overall mylar tape shield with drain wire
- 1000 volt rated construction
Specification Data
Package and Delivery
Â
Technical Cleaning Kits
Mediclean is a specialist offer professional cleaning solutions for a comprehensive range of technical devices, Technical Cleaning Kits include below categories divided by applications: Card Printer Cleaning Kits , Barcode Printer Cleaning Supplies, Receipt Printer Cleaning Supplies, Label Printer Cleaning Supplies, Inkjet Printer Cleaning Supplies, Kiosk Printer Cleaning Supplies, ATM Cleaning Supplies, Credit Card Reader Cleaning Supplies, Bill Acceptor Cleaning Supplies, Check Scanner Cleaning Supplies, Currency Counter Cleaning Supplies, Screen LCD Cleaning Supplies. Technical Cleaning Supplies include below Products: Technical Cleaning Cards, IPA Printhead Cleaning Pens , IPA Presaturated Cleaning Foam Swabs , IPA Snap Swabs , IPA Polycellulose Cleaning Wipes, Adhesive Cleaning Cards , Adhesive Cleaning Rollers , Thermal Print Head Lapping Films, Magnetic Head Cleaning Cards .
Presaturated Cleaning Cards
Mediclean can provide all types of Cleaning Card shapes, CR80/CR50 standard size, Long-T shape, Short-T shape, Long-I shape, etc. Our technical cleaning cards are constructed by Non-woven Spunlace Fabric. Spunlace is absorbent that can increase cleaning time due to slow down IPA evaporating during cleaning process. Equipped with automatic lamination machine, Mediclean has the production capacity of millions of cards per month, it reduce our production cost and keep Mediclean the most competitive company in the market. Customer can decide to use which solution, whether Isopropyl Alcohol or Alcohol Free Solution imported from USA. IPA has better capacity to remove residue, oil, glue, but harsh and inflammable. Alcohol Free Solution is more Eco-friendly and cost the same with IPA. Packaged in 3 layers of aluminium foil bags, our presaturated cleaning cards can be storage as long as two years without IPA leaking.
IPA Printhead Cleaning Pens
IPA Cleaning Pen is specially used to clean Thermal Printer Printhead . With a rigid but smooth pen head, it can remove oxide residue from printhead without scratching it. Over Pre-saturated Foam Swabs , IPA Cleaning Pens can be used for more than 10 times, it is a cost-effective solution to clean all thermal print head. Please note that after one use, you can scratch the pen head on a clean white paper to remove dirt on the pen head, so you can reuse it next time. Once the pen head is too dirty to reuse, Mediclean offer extra pen heads for your alternative.
IPA Presaturated Cleaning Swabs
Presaturated Clean Foam Swabs are pre-wetted with IPA solution, and packaged in a sealed aluminium foil bag. IPA Presaturated Cleaning Swabs are ready to use, time saving, and disposable, they are suitable for less use applications. The foam tip is absorbent, soft and clean, it is a good option to remove oil, ink, and glue. Pre-wetted Cleaning Swabs are ESD safe as IPA solution is apparently electrostatic dissipative. IPA Presaturated Swab is widely used on many applications such as printhead, capping station, transport rollers, keyboard, and many more.
IPA Snap Swabs
Snap Swabs have IPA solution sealed in the Polypropylene handle, simply snap the handle, the IPA solution will come out and fulfil the foam head. IPA Snap Foam Swab have longer storage life, easy to use. The tip is constructed by 100 PPI Polyurethane foam. The only disadvantage is that it is more difficult for shipping due to concentrated liquid sealed in the handle, resulting in might be arrested by custom for secure reason.
IPA Cleaning Wipes
IPA Presaturated Cleaning Wipes are made from 55% cellulose and 45% polyester, presaturated with 99.9% IPA solution. The size is 127 x 152mm, any customized size is also available. IPA Cleaning Wiper is a general use product suitable for most applications such as printhead, platen rollers, screen, case surface,etc. During using a Presaturated Cleaning Wiper , please make sure you have turned off device power in case of electric shock.
Adhesive Cleaning Cards
Adhesive Cleaning Cards are specially used on card printers. Card Printer Adhesive Cards can only grab dust and particles on printer rollers, they are effectless for oil, ink and glue. They are constructed by 3M original glue paper which feature strong stickiness ,heat resistant and humidity resistant. The stickiness is stronger than Card Printer Adhesive Rollers , so that they can remove the dust from Adhesive Rollers .
Adhesive Cleaning Rollers
Adhesive Roller is a specific part in Card Printers, it is used to remove dust from blank cards in the first procedure of card printing. After hundreds times of printing, Card Printer Adhesive Rollers will get lots of dusts on it result in less stickiness, so you need to use a Card Printer Adhesive Card to clean it or replace it with a new Adhesive Sleeve. Contact Mediclean for extra Card Printer Adhesive Cleaning Sleeves.
Thermal Print Head Lapping Films
Thermal Print Head is the most important and expensive part in a thermal printer, it is critical to take care of your printer printhead. If there are light scratches on the Thermal Print Head, you can restore the surface by polishing it with Aluminium Oxide Coated Lapping Film. But special care must be taken to ensure that polishing is carried out correctly. Printhead Lapping Film Rollers can be fabricated into sheets of various sizes: 3"x6", 4"x6`, 4"x8", or even customized to meet customer`s specific need. 4"x6" Lapping Film is the most popular size sold in the market.
Magnetic Head Cleaning Cards
Magnetic Stripe Cleaning Cards are specially used for ATM Cleaning. Some ATM equipment need to detect magnetic stripe before cards access, ATM Encoded Cleaning Card carry magnetic stripe on the surface, so can be accepted by the ATM. ATM Magnetic Cleaning Card can clean the magnetic heads, card pathways, transport belts, and transport rollers. Regular cleaning maintenance will decrease ATM reading failure. Magnetic Encoded Cleaning Card is a cost-effective and convenient solution to clean your ATM without disassembling the ATM, it can save your labor cost and time.
Technical Cleaning Kits
Printer Cleaning Kits,Printhead Cleaning Pens,Presaturated Cleaning Cards,Long Cleaning Card, CR80 Cleaning Card, Cleaning Foam Swab
Mediclean Technology Co.,LTD. , http://www.mediclean-tech.com