450/750V, 600/1000V XLPE Insulated Control Cable Flame Retardant, Halogen Free

APPLICATION 
control cable with XLPE insulation, braided shielding, steel tape armouring,PVC JACKET flame retardant halogen free, shielding 450/750V,600/1000V

Generally speaking, there are two ways of copper wires braided screen and copper tape wrapped screen for control cables, however, copper wires braided screen has stable structure, the effect of screen won't change with the cable bending or appearance factors etc, but also doesn't have influence on cables' flexibility, braiding density can reach over 80%, besides,copper tape wrapped screen percentage of coverage can reach up to 100%.

Plastic PVC Insulated Screened control Cables are used for rated voltage up to and including 450/750V.

The long-term operating temperature of PVC insulation cable conductor should be lower than 70°C,and that of XLPE insulation should be lower than 90°C.

The installing ambient temperature of cables shouldn't be lower than 0°C,the Min. bending radius of installing is 6 times of the outer diameter.



CONSTRUCTION 
1.Conductor Material: 0.20mm stranded copper or CCA(25%copper) ROHS

2.Insulation Material: 1.5mm PVC(Flame resistant, ROHS)

3.Insulation Thickness: ≥0.65mm

4.Jacket Material: Ral 7035PVC(Flame resistant, ROHS)

5.Core No.: 2/3/4/6/8/10/12/14/16 cores

The control cable can be produced according to the standard GB9330-1988,IEC,DIN,BS,and the factory can also manufacture the cables in accordance with other standards.


  APPLICATION 
control cable with XLPE insulation, braided shielding, steel tape armouring,PVC JACKET flame retardant halogen free, shielding 450/750V,600/1000V

Generally speaking, there are two ways of copper wires braided screen and copper tape wrapped screen for control cables, however, copper wires braided screen has stable structure, the effect of screen won't change with the cable bending or appearance factors etc, but also doesn't have influence on cables' flexibility, braiding density can reach over 80%, besides,copper tape wrapped screen percentage of coverage can reach up to 100%.

Plastic PVC Insulated Screened control Cables are used for rated voltage up to and including 450/750V.

The long-term operating temperature of PVC insulation cable conductor should be lower than 70°C,and that of XLPE insulation should be lower than 90°C.

The installing ambient temperature of cables shouldn't be lower than 0°C,the Min. bending radius of installing is 6 times of the outer diameter.



CONSTRUCTION 
1.Conductor Material: 0.20mm stranded copper or CCA(25%copper) ROHS

2.Insulation Material: 1.5mm PVC(Flame resistant, ROHS)

3.Insulation Thickness: ≥0.65mm

4.Jacket Material: Ral 7035PVC(Flame resistant, ROHS)

5.Core No.: 2/3/4/6/8/10/12/14/16 cores

The control cable can be produced according to the standard GB9330-1988,IEC,DIN,BS,and the factory can also manufacture the cables in accordance with other standards.


 

APM satisfies High Voltage Dc Power Supply application demands, allowing the SP series to cover a voltage range from 0V to 800V. It delivers advanced features. The compact 2U high 19inch wide Adjustable Dc Power Supply were designed to meet the needs of both system integrator and bench top users.

Some features of the Switch Mode Power Supply as below:

• Ultrafast respond time and high efficiency
• Accurate voltage and current measurement capability
• Constant Power and wide range of voltage and current output
• Equips with LIST waveform editing function
• Compliant with SCPI communication protocol
• Support RS232/RS485/LAN/USB (standard) ,GPIB (optional)
• Built-in standard automobile electrical testing curves
• Full protection: OVP/OCP/OPP/OTP/SCP
• Voltage drop compensation by remote sense line.
• Have obtained CE,UL,CSA,FCC.ROHS

800V Dc Power Supply

800V Dc Power Supply,Smps Power Supply,Variable Voltage Power Supply,Dc Adapter Power Supply

APM Technologies (Dongguan) Co., Ltd , http://www.apmpowersupply.com