This week, at the Misk Global Forum in Riyadh, Saudi Arabia, Bill Gates, co-founder of Microsoft and a prominent philanthropist, shared his insights on the rapid advancements in technology, particularly artificial intelligence (AI). While Gates has previously expressed concerns about the potential risks AI could pose, he emphasized during the forum that the benefits of AI will significantly outweigh its challenges—especially in healthcare. He argued that AI has the potential to revolutionize medical treatments, improve diagnostics, and ultimately save countless lives. Gates remarked, “We live in a world with limited resources, but these technological advances can help us solve the most pressing problems.” He highlighted the importance of using AI to tackle infectious diseases and support healthcare workers in their critical roles. His vision is one where AI becomes a powerful tool for global health improvement. In addition, Gates pointed out that AI and robotics are set to transform labor markets in developed countries. He explained that as automation takes over repetitive tasks in industries like manufacturing, human labor can be redirected toward more people-centric sectors. This shift, he believes, could free up time for society to focus on care for the elderly and other essential human services. Earlier this month, at the Future Investment Initiative in Riyadh, Boston Dynamics' CEO, Mark Raibert, also spoke about the positive impact robots can bring to various industries. However, Gates also warned that if AI and robotics are not developed responsibly, they could widen the gap between the rich and the poor. He cautioned, “If we’re not careful, technology might only benefit the wealthy, especially if access to advanced education and tools remains limited to those who can afford them.” This concern underscores the need for equitable access to AI technologies. Despite his reservations, Gates remains optimistic. Although he acknowledges that AI could lead to job displacement and even poses risks from superintelligence, he insists there’s no need for panic. In fact, he disagrees with Elon Musk, who has been vocal about the dangers of AI surpassing human control. Gates told the Wall Street Journal, “The so-called control problem that Elon is worried about isn’t something we should fear immediately.” Musk isn’t the only one raising alarms about AI. Renowned physicist Stephen Hawking once warned that AI could eventually surpass humans and take over jobs, even suggesting it might “completely replace humans” in the future. However, both Hawking and Gates agree that AI can be harnessed for the greater good. At the Web Summit in Lisbon, scientists from Cambridge University stated that AI can coexist harmoniously with humans. Like Musk, Hawking has called for stronger regulations to ensure AI development remains safe and beneficial. He urged, “We need to understand and identify the risks, implement proper measures, and prepare for the potential impacts of AI in advance.” The key message from these leaders is clear: while AI presents challenges, its potential for positive change is immense—if guided responsibly.

2.54mm Female Pin Header

2.54mm (0.1") Pitch Female Headers
Overview
The most commonly seen female headers are 2.54mm (0.1") single or double row female/socket headers. These female headers together with its male counterpart are used in connecting Arduino boards and shields together. 2.54mm pitch female sockets/headers are low-profile connectors designed for signal and low power PC board connections when space is at a premium. They have the perfect height for clearing the USB-B connector and great for stacking multiple shields.
Since 2.54mm pitch female header is commonly used in a lot of applications, Scondar offers numerous options for this type of female header. Orientation can either be SMT or THM, single, dual or triple row. Antenk offers 2.54mm pitch female headers in either vertical or right-angle orientation. The pins and blades are also available in various sizes, counts, amperages, and plating.

The 2.54mm can accommodate a maximum current of 3A, with a 30 to 22 AWG wire size, and up to 40-positions. Antenk offers these female headers in high quality and affordable China-quoted price that snuggly fits with the pins of a male header and acts as a receptacle.

Female header always called as [Header connector", Antenk provide widely range of header connector, from 2.54mm (.100″ inch) pitch to 1.0mm (.039″ inch) pitch. The number of pins (contacts) is from 2 to 40 pins per row. There are three type: Straight (Dip Vertical), Right angle, SMT (surface mount).
If you can not find the items you interest from above items, welcome to contact us, and you will always get fully responsive from us.

Applications of 2.54mm Pitch Female Headers
Electronics:
LED applications
Arduino boards
Arduino Pro
Arduino Mega
Solar applications
Weighing systems

Appliances:
Air conditioner
Refrigerator
Microwave oven
Washing machine
Water heater
Shower toilet
Washer/Dryer
Stove
Automotive, Heavy Duty Military and Marine
For densely packed equipment requiring weight reduction and downsizing and for tough and harsh conditions.

Vehicle infotainment
Computer peripherals
Battery Connections
Battery connections rely on the ability of the current to pass reliable and solid current. This prevents overheating in the circuit and voltage drop.
Rechargeable battery packs
Battery balancers
Battery eliminator circuits
Medical Diagnostic and Monitoring equipment

Heart monitors

Communications
Telecoms
Datacoms

Mount Type: Through-hole vs Surface Mount

At one side of this female header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).

Through-Hole (Poke-In)

Best used for high-reliability products that require stronger connections between layers.
Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.
Useful in test and prototyping applications that sometimes require manual adjustments and replacements.
2.54mm, 1-row vertical female header, 2.54mm, 2-row vertical female header, 2.54mm, 3-row vertical female header, 2.54mm, 1-row right-angle female header and 2.54mm, 2-row right-angle female header, 2.54mm U-
Shaped Female header, 2.54mm U-Shaped Dual Row Female header are examples of Antenk products with through-hole mount type.

Surface-Mount
The most common electronic hardware requirements are SMT.
Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.
Cost of processing and handling is reduced.
SMT components can be mounted on both side of the board.
Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.
2.54mm, 2-row right-angle female header and 2.54mm, 1-row right-angle female header are Antenk`s featured SMT female headers.

Orientation/Pin-Type: Vertical (Straight), Right-Angle and U-Shaped

2.54mm pitch female headers may be further classified into pin orientation as well, such as vertical or straight female header, right-angle female header or U-shaped female header.

Vertical or Straight Female Header Orientation
One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or..

Right-Angle Female Header Orientation
Parallel to the board's surface (referred to as "right-angle" pins).
U-Shaped Female Header Orientation
U-shaped orientation is characterized by the shape of the pins at one side of the header, forming a letter [U". It is often chosen for applications where repeat mating cycles are not required as it can also be used and soldered directly to both PCB's.
Each of these pin-types have different applications that fit with their specific configuration.

Single, Dual or Multiple Number of Rows
For a 2.54mm straight or vertical female header, the standard number of rows that Antenk offers ranges from 1 to 2 rows. However, customization can be available if 3, 4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-40 pins while for dual row, the number contacts may vary from 2-80 pins.

Pin Material
The pins of the connector attached to the board have been designed with copper alloy. With customer`s demand the pins can be made gold plated.

Custom 2.54mm Pitch Female Headers
Customizable 2.54 mm pitch female headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.
Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.

Tape and Reel Packaging for SMT Components
Antenk's SMT headers are offered with customizable mating pin lengths, in which each series has multiple number of of circuits, summing up to a thousand individual part number combinations per connector series.
The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.
Antenk also offer a range of custom Tape and reel carrier strip packaging cavities.

Pcb Header Connector,2.54Mm Female Pin Header,2.54Mm Pcb Header,2.54Mm Pcb Connector,0.1" Pitch Female Headers,2.54mm SMT Female Pin Header, THT 2.54mm Female Pin Header

ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com