In practice, the frequency range and frequency response of sound have always been a topic of interest. However, due to the specialized knowledge involved, many people tend to have a one-sided understanding of these concepts. What exactly is the difference between frequency range and frequency response? Is a higher frequency always better for sound quality? And how high can sound frequencies go?
**Understanding Frequency Range and Frequency Response**
The frequency range refers to the span between the lowest and highest frequencies that a sound system can effectively reproduce. On the other hand, frequency response describes how a speaker reacts when an audio signal with a constant voltage is applied. It measures the variation in sound pressure level and phase shift as the frequency changes. This relationship between sound pressure, phase, and frequency is expressed in decibels (dB) and is commonly referred to as the frequency response.
**Analyzing the Frequency Characteristics of Sound Systems**
Sound system performance is often illustrated using a graph where the vertical axis represents sound pressure in decibels and the horizontal axis shows frequency on a logarithmic scale. When the sound level drops by 3 dB from its normal level, it marks the upper and lower cutoff points of the frequency response. The area between these two points defines the usable frequency range of the system. The curve showing sound pressure versus frequency is known as the amplitude-frequency characteristic, while the phase shift over frequency is called the phase-frequency characteristic. These are key indicators of speaker performance and directly affect both sound quality and cost. A flatter frequency response means less distortion and better overall performance.
For example, a speaker with a frequency response of 60Hz to 18kHz ±3dB is considered to have a good balance. Sometimes, the terms "frequency range" and "frequency response" are used interchangeably, but they represent different aspects of a system's performance.
**What Is the Ideal Sound Frequency Range?**
In theory, a frequency range of 20Hz to 20,000Hz is sufficient for most listening experiences. While frequencies below 20Hz may not be audible, they can still be felt as vibrations, contributing to the perception of bass. To accurately reproduce musical instruments and speech, amplifiers need to cover a wide range. Therefore, extending the lower limit below 20Hz and the upper limit beyond 20,000Hz helps achieve high-fidelity sound.
Different devices have varying frequency response specifications. For instance, FM stereo broadcasts set their standard at 40Hz to 15,000Hz with a tolerance of ±2dB, while recording studios typically require a minimum of 40Hz to 12,500Hz with a tolerance of ±2.5dB. Modern CD players can easily reach up to 20,000Hz, and their low-end can go down to just a few Hertz, which significantly contributes to their superior sound quality.
**Is a Wider Frequency Range Always Better?**
While a wider frequency range can enhance sound quality, this isn’t always the case, especially for mid-to-low-end multimedia speakers. In product specifications, you’ll often see terms like “system frequency response†and “amplifier frequency response.†It’s important to note that the “system frequency response†is usually narrower than the “amplifier frequency response.†Simply labeling a speaker with a wide frequency range doesn’t necessarily mean it delivers high-quality sound.
Many manufacturers exaggerate the low-frequency range, claiming numbers that are unrealistic. For example, some domestic speakers claim to go as low as 40Hz or 50Hz, but in reality, they struggle to produce clean bass. High-end international Hi-Fi speakers often list similar values, but they are backed by real performance. So, don’t rely solely on what’s printed on the box—actual listening experience matters more.
When choosing multimedia speakers, focus on their ability to reproduce mid and high frequencies, as most music, games, and movies rely on those ranges. If you're looking for a cinematic experience, a subwoofer will give you the deep bass you need without compromising clarity in other frequency areas.
recordable stuffed toy:
Ningbo AST Industry Co.,Ltd has 17 Years Experiences to produce the Recordable Plush Toy,Stuffed toy,Teddy Bear,Soft Toys ,Musical Plush toys and so on ,we can assure you of competive price,high quality,prompt delivery and technology supporting.
1. recordable stuffed toy application :
The Recordable Plush Toys as the Gifts can record your own and present them to your friends,children and family.
2.Press the Record Button to record your Own Message,then press the play button to play the message.
3.Recording time:12s,20s,30s and so on
4.Sound Quality:Clearly and Loudly
5.Packaging;Color box
6.Certification:CE ,Rohs
7.Export to:
USA, UK,Canada,Germany, Turkey,Russia,Poland,Switzerland,Netherland ,Frence Hungary ,Australia,New Zealand, Brazil, Columbia,Argentina,Thainland,Singapore , Malaysia and so on
  |
|
Recordable Plush Toy, Musical Teddy Bear, Recordable Stuffed Toy
AST Industry Co.,LTD , https://www.astsoundchip.com